Mold Remediation in Frisco, TX

Licensed mold remediation for Frisco homes and businesses. We contain the work area, remove the mold, dry the structure, and put the space back together.


Talk to a Licensed Mold Remediator

(469) 523-9982 Call Now - 24/7
google 5 stars

☞ We Work Directly With Your Insurance

Who removes mold in Frisco?

A Texas-licensed mold remediation contractor. Triad Property Recovery holds a Texas Mold Remediation Contractor license (TDLR RCO1757).

You might notice a musty smell in a closet, dark spots along the baseboard, or a ceiling stain that keeps spreading. What you see is usually the smallest part of it. Mold grows where moisture stays, often inside the wall, under flooring, or in attic insulation, so the fix has two parts. Remove what's growing, and dry out what let it grow.

What causes mold in Frisco homes?

Water that wasn't dried completely. Common sources in Frisco are slow plumbing leaks, AC condensate lines in the attic, roof leaks after hail, and water damage that was cleaned up but not fully dried.

Slow leaks. A dripping supply line under a sink or behind a dishwasher can feed mold for weeks before anyone sees it.

Attic AC units. Many Frisco homes have air handlers in the attic. A clogged condensate line can soak insulation and the ceiling below.

Hail and roof leaks. Spring storms across Collin County crack shingles and flashing, and water travels through insulation before it shows up as a stain.

Leftover moisture. Carpet and drywall can feel dry on the surface while the pad, framing, or wall cavity stays wet. That hidden moisture is where mold starts.

What happens during mold remediation?

We seal off the area, remove moldy materials, clean what can be saved, dry the structure, and rebuild.

1. Contain. Plastic barriers and HEPA-filtered air keep spores from spreading to the rest of the house.

2. Remove. Moldy drywall, insulation, and carpet pad come out and are bagged before they leave the containment.

3. Clean. Framing and other materials that can stay are HEPA vacuumed and cleaned.

4. Dry. We check moisture readings and dry the structure so the mold doesn't come back.

5. Rebuild. Our team replaces drywall, insulation, flooring, and paint, so you're not hiring a second contractor.

  • Do you do mold testing?

    No. We refer you to a licensed mold assessment consultant, and we follow the protocol they write. Texas doesn't allow one company to do both on the same project.

  • Can I clean mold myself with bleach?

    For a small spot on a hard surface, often yes. Bleach doesn't reach mold growing inside drywall or wood, and scrubbing larger areas can spread spores through the house.

  • Do I have to leave my home during remediation?

    Usually not. The work area is sealed off from the rest of the house. For large projects, or if anyone in the home has health concerns, we'll talk through whether staying elsewhere makes sense.

  • How do I know the mold is gone?

    Before we rebuild, we take moisture readings and inspect the area to confirm the moldy material is out and the structure is dry.

  • Do you fix the damage after the mold is removed?

    Yes. Our team rebuilds drywall, insulation, flooring, and paint once the mold is removed and the structure is dry.

Three water drops are in a circle on a white background.

Request Service


Water Damage - Quote Request

Is mold an emergency?

Mold itself usually isn't an overnight emergency, but active water is. If water is still leaking or standing, call us any time and we'll stop the water damage first. Once the water is under control, mold remediation is scheduled like any other project.

Where in Frisco do you work?

All of Frisco, from Frisco Square and Newman Village to Starwood, Phillips Creek Ranch, and Frisco Lakes. We come to you.

Frisco neighborhoods
  • Frisco Square
  • Starwood
  • Phillips Creek Ranch
  • Frisco Lakes
  • Newman Village
ZIP codes
  • 75033
  • 75034
  • 75035
  • 75036
Nearby cities
  • Plano
  • McKinney
  • Prosper
  • The Colony

Have active water damage too? See our water damage restoration in Frisco. The same team handles both, so you work with one company from start to finish.

Serving Frisco & All of Collin County

Serving Frisco & All of Collin County

Recent mold job

Mold behind a refrigerator in a commercial office

Mold had spread across the wall behind an office refrigerator. We sealed off the area with zippered plastic containment and HEPA-filtered air, removed and bagged the damaged materials inside the work area, then cleaned and encapsulated the wall.

  • Property Office suite
  • Setup Plastic containment and HEPA air
  • Result Wall cleaned and encapsulated
Mold growth spreading across a white wall behind a refrigerator in a commercial office
Mold on the wall behind a refrigerator, before
Plastic containment walls with a zipper door and HEPA air scrubber duct in a commercial office hallway
Containment and HEPA air keep spores in the work area
Sealed black bags of removed mold-damaged materials stacked in a room
Removed materials bagged before leaving containment
Clean white wall behind a refrigerator after mold remediation in a commercial office
Same wall, cleaned and encapsulated
Google reviews

What mold remediation customers say

5.0 on Google
★★★★★
“I recently needed a mold remediation job for our rental property and I am so glad my MAC recommended Triad Property Recovery. He walked me through the work scope and explained to me what to expect. A couple days later his team executed a top notch job and I am very satisfied.”
Lynn W. March 2026
★★★★★
“We had a mold issue in both of our bathrooms. We found out that there was a leak under the tub that had caused all the mold to spread throughout the walls and cabinets. They were able to remediate everything very efficiently while ensuring that the work site was sealed from the rest of the home.”
Eric F. January 2026
★★★★★
“We had serious water damage and mold issues in our kitchen and in other areas in our house that they found. Triad had the mold remediation taken care of immediately. We went ahead and had Triad tear-out the entire kitchen and re-build the kitchen. In less than 2 weeks it was completely done.”
Denise B. August 2025

Will insurance cover mold removal?


Sometimes. Many homeowners policies cover mold only when it comes from a sudden, covered water event like a burst pipe, and some cap mold coverage at a set dollar amount. Every policy is different, so check yours or call your agent. When there is a claim, we provide the photos, moisture readings, and scope your adjuster asks for.

Who rebuilds after mold removal?


We do. Once the mold is removed and the structure is dry, our own rebuild crew replaces drywall, insulation, flooring, and paint. You are not hiring a second contractor or waiting on another company's schedule.

How do I get mold removed in Frisco?

Call Us to Get Started

Seeing or smelling mold in Frisco? Call us or use the online form. A real person answers, asks what you're seeing, and gets your mold remediation on the schedule.

Containment, Removal & Rebuild

We seal off the work area with plastic barriers and HEPA-filtered air, remove mold-damaged materials, and clean and dry what stays. Then our crew rebuilds the drywall, insulation, flooring, and paint.

Insurance Claims Assistance

When mold comes from a covered water event, we work directly with your adjuster and provide the photos, moisture readings, and scope they ask for. Every policy is different, so check yours or call your agent.